StackLift
All playbooks

Playbook

Software RFP Template

A good RFP lets vendors answer the same questions so you can compare proposals fairly. This template gives you the sections and a scoring sheet to adapt.

Best reader

Buyers, procurement leads, and founders choosing a software development partner

Outcome

An RFP vendors can answer clearly and a scoring method that makes the decision defensible.

Use this sequence

1

State the business background and the problem to be solved.

2

Define scope, deliverables, and what is out of scope.

3

List functional, technical, and security requirements.

4

Set the response format, deadlines, and question process.

5

Publish the evaluation criteria and the scoring method.

6

Ask for pricing in a common structure so offers compare.

7

Score independently, then meet to reconcile and choose.

What an RFP should contain

Most software RFPs share the same spine: background, scope, requirements, submission instructions, evaluation criteria, pricing instructions, and terms.

Background

Scope and deliverables

Requirements

Submission rules

Terms

Tell vendors how you will score

Publishing your criteria tells vendors what evidence to provide and keeps your panel consistent. Decide must-pass items and weights before you read any response.

Must-pass gates

Weighted criteria

Reference checks

When to skip the RFP

A formal RFP is slow. For a small or uncertain scope, a scoped discovery step and an estimate often tell you more than a long questionnaire.

Small scope

Unclear requirements

Tight timeline

Start in 60 seconds

Turn this checklist into a scoped plan.

Answer a few questions and get an AI-assisted, architect-reviewed scope, cost range, and timeline for your software project.

Frequently asked questions

What is the difference between an RFP, an RFQ, and an RFI?

An RFI gathers general information about options. An RFQ asks for a price on a well-defined item. An RFP asks vendors to propose a solution and a price for a described problem.

Should the RFP include a budget?

Sharing a budget range helps vendors propose a solution that fits it. If you cannot share one, ask for options at different levels of scope instead.

The complete guide

Software RFP Template: the complete guide

Updated November 18, 2026 ยท Published by , Founder, StackLift AI. Written with AI assistance; how we make content.

Short answer

A software RFP describes your business problem, scope, requirements, response format, evaluation criteria, and pricing structure so vendors answer the same questions and you can compare them fairly. Publish how you will score, set must-pass gates, and ask every vendor for evidence rather than claims.

What is a software RFP and when do you need one?

A request for proposal asks vendors to propose a solution and a price for a problem you describe. It works best when the stakes are high, several vendors could do the job, and you need a documented, defensible choice. Public bodies and larger companies often require one.

An RFP costs time on both sides. Vendors spend days answering, and your team spends weeks reading. If your scope is small or still forming, a structured discovery step usually gives you better information faster. The table near the end of this guide helps you decide.

What sections should a software RFP template include?

Most software RFPs share the same spine. Copy the outline below, then cut what does not apply. Keep the document short enough that a vendor can answer it carefully.

Software RFP template outline
SectionWhat to writeWhy vendors need it
Cover and timelineProject name, issue date, question deadline, submission deadline, decision dateSo they can plan their response
BackgroundWho you are, the business problem, and what exists todaySo they propose to the real situation
Goals and success measuresWhat must change and how you will judge itSo they aim at outcomes, not features
Scope and deliverablesWhat is in, what is out, and what you expect deliveredSo prices compare like with like
RequirementsFunctional, technical, integration, and security needs, marked must or niceSo they can say what they cover
ConstraintsDates, budget range if shareable, existing systems, regulationsSo they do not propose the impossible
Delivery approachProcess, team, communication, testing, and handover expectationsSo you see how they work
Response formatThe structure each answer must followSo you can compare answers side by side
Pricing instructionsThe structure to price in and what to includeSo offers are comparable
Evaluation criteriaThe criteria, weights, and must-pass gatesSo they give the evidence you need
TermsConfidentiality, IP ownership, payment, and contract basicsSo legal issues surface early

Pair the requirements section with a PRD if you have one. The better your requirements, the fewer assumptions each vendor has to guess at.

How do you write and run an RFP, step by step?

  1. Agree internally on the problem, the goals, and who decides. Output: a one-page brief and a named decision group.
  2. Write the scope and requirements, marking each as must or nice. Output: a requirements list vendors can answer line by line.
  3. Draft the evaluation criteria and scoring sheet at the same time. Output: criteria published in the RFP match the ones your panel will use.
  4. Set the timeline, including a window for vendor questions. Output: a schedule with dates for questions, answers, submission, and decision.
  5. Send the RFP to a short list of vendors, and share every answer to a question with all of them. Output: a fair process.
  6. Score each response alone first. Output: independent scores before group discussion.
  7. Meet to reconcile scores, shortlist, and hold demos or workshops. Output: two or three finalists.
  8. Check references and the due diligence items, then negotiate. Output: a chosen partner and a contract draft.

Keep the short list short. Three to five well-chosen vendors give you a real comparison without drowning your panel. For the review of the chosen vendor, use the vendor due diligence checklist.

How do you set evaluation criteria and score proposals?

Decide the criteria before you read any response. Set a small number of must-pass gates, such as security requirements and ability to meet a legal need, then weight the rest. Publish the criteria so vendors know what evidence to supply. Different people should score their own area: security, finance, and the business owner each judge what they know.

Example scoring sheet (adapt the criteria and weights to your project)
CriterionTypeWhat good evidence looks like
Security and data handlingMust-pass gateClear controls, current audit evidence, data processing terms
Technical approachWeightedA plan that fits your requirements and systems, with named trade-offs
Relevant experienceWeightedSimilar work described in detail and references you can call
Delivery processWeightedVisible progress, testing, and change control
TeamWeightedNamed roles and how the team is staffed over time
Commercial termsWeightedClear pricing structure, what is included, how change is priced
Support and handoverWeightedWhat happens after launch and how you take ownership

Use one scale for all criteria, such as zero to five, with a written meaning for each score. Weights are your own judgment, not a standard. Cost should not decide alone, because the lowest price often leaves out work you will need later.

How should you ask vendors to price their proposals?

Ask every vendor to price in the same structure, or you will spend your time reconciling formats. Request the price by phase or deliverable, a list of assumptions, what is not included, and how they price change. Ask for options at different scope levels if your budget is uncertain.

Pricing models you may see
ModelHow it worksWatch for
Fixed priceOne price for defined scopeThin scope definition and costly change orders
Time and materialsYou pay for effort usedOpen-ended totals without a cap or review points
By deliverablePrice per defined output or complexity unitClear definition of each deliverable
Retainer or capacityOngoing team for a set periodWhat the team delivers each cycle

Fixed scope vs hourly billing compares two common approaches and their trade-offs. For a sense of what drives cost by project type, see the cost guides.

What questions should the RFP ask vendors?

Good questions ask for specifics a vendor can only give if they have done the work. Avoid yes-or-no questions that invite a yes. Ask them to describe, show, or give an example.

  • Describe a similar project: the problem, your role, what went wrong, and how you handled it.
  • Who will work on this, in what roles, and for how much of the project?
  • How do you test, and what does the client see before release?
  • How are changes to scope requested, priced, and approved?
  • Where does the code live, who owns it, and what do we receive at the end?
  • How do you handle our data, and who else can access it?
  • If you use AI tools in delivery, which tasks do they do, and who reviews the output?
  • What are the biggest risks you see in our brief, and what would you do about them?

The last question is the most revealing. A vendor who reads your brief closely will name real risks. One who answers with generalities has not.

RFP, discovery sprint, or direct estimate: which fits?

Choosing how to select a partner
SituationBetter approachWhy
Large, regulated, or multi-vendor project with a clear scopeFormal RFPA documented, comparable process
Scope unclear or still changingDiscovery or scoping sprint firstYou learn the scope before pricing it
Small project with clear needsDirect estimates from two or three vendorsFaster, with less overhead
You need a quick sense of cost and timelineA free online estimateA starting range before any outreach
Replacing an existing vendorRFP plus a handover planThe transition matters as much as the price

StackLift's engagement ladder starts with a free AI Project Snapshot and a 3-day AI Scope Sprint, which produces detailed scope, user stories, tech stack, and a cost and timeline range. If you prefer to define scope first and invite bids after, that output can serve as the requirements section of an RFP. The free estimate takes about five minutes and needs no signup.

What red flags should you watch for in responses?

  • Generic answers that could apply to any project and ignore your brief.
  • A price far below the others with no explanation of what is left out.
  • No mention of testing, security review, or handover.
  • Vague ownership terms for code, data, or accounts.
  • References that cannot be reached or that are unrelated to your problem.
  • Pressure to sign quickly or to skip the scoping step.
  • No questions back to you. A good vendor always has questions.

Compare these against what you can verify. Ask for a working session or a short paid workshop with the finalists. It shows how they think far better than a written answer. For how to compare building in-house with outsourcing, see in-house vs outsourced development.

What mistakes make RFPs fail?

Common mistakes and fixes
MistakeResultFix
Writing the criteria after reading responsesScoring bends toward a favoriteFix criteria and weights first
Asking for a fixed price on unclear scopePadded prices or later disputesDefine scope or ask for phased pricing
Sending it to too many vendorsShallow answers and a slow reviewShort list three to five
Hiding the budget entirelyProposals that cannot fitShare a range, or ask for options
One person scoring everythingMissed security or legal issuesEach expert scores their area
No plan for what happens after selectionDelays and lost momentumPlan contract and kickoff in advance

If you would like help structuring requirements before you go to market, contact us.

Questions people ask

What is the difference between an RFI, an RFQ, and an RFP?

An RFI gathers general information about what vendors can offer. An RFQ asks for a price on a well-defined item. An RFP asks vendors to propose a solution and a price for a problem you describe.

How long should a software RFP be?

Long enough to state the problem, scope, requirements, and rules clearly, and short enough that vendors can answer carefully. Move long requirement lists into an appendix or spreadsheet.

Should an RFP include the budget?

Sharing a range helps vendors propose something that fits. If you cannot share one, ask for options at different levels of scope so you can see what each extra step costs.

How many vendors should you send an RFP to?

Three to five well-chosen vendors is enough for a real comparison. More responses raise your review work without improving the decision.

Should you share your scoring criteria with vendors?

Yes. It tells vendors what evidence to provide, and it keeps your panel consistent. Keep the exact scores private, but publish the criteria and whether each is a gate or weighted.

Can you write an RFP for an AI project?

Yes. Add sections on the task the AI does, how quality will be judged, where human review sits, what data is used, and how model cost is controlled. Ask vendors how they test AI behavior before and after launch.

What happens after you choose a vendor?

Run due diligence, negotiate the contract, agree on the scope baseline and change process, and plan the kickoff. Decline the other vendors politely and keep notes in case your first choice falls through.