StackLift
All playbooks

Playbook

API Integration Checklist

Use this checklist before connecting your product to a third-party API. It covers the failures that appear in production: timeouts, duplicates, rate limits and lost webhooks.

Best reader

Engineering leads and product owners planning integrations with payment, CRM, ERP, messaging or AI providers

Outcome

An integration that fails safely, can be monitored and can be changed without surprises.

Use this sequence

1

Read the provider documentation for limits, authentication, versioning and error formats.

2

Design authentication and secret storage, one credential per integration.

3

Make every write idempotent and every retry bounded.

4

Handle rate limits with queuing and backoff.

5

Verify, deduplicate and replay webhooks.

6

Test failure modes, then monitor and alert in production.

Plan for failure first

The happy path rarely breaks. Timeouts, duplicates and partial failures do.

Timeouts on every call

Idempotency keys on writes

Bounded retries with backoff

A dead-letter path for what cannot be processed

Treat webhooks as untrusted and unordered

Webhooks can arrive twice, late or out of order. Verify them and process them safely.

Check the signature

Acknowledge fast, process later

Deduplicate by event ID

Store the raw payload for replay

Own the contract

Providers change. Pin versions where you can and keep a record of what you depend on.

API version pinned

Fields you rely on listed

Change notices routed to a named person

Start in 60 seconds

Turn this checklist into a scoped plan.

Answer a few questions and get an AI-assisted, architect-reviewed scope, cost range, and timeline for your software project.

Frequently asked questions

What is an idempotency key?

A unique value sent with a write request so the provider can recognize a repeat and return the original result instead of doing the work twice. It makes retries safe.

Should we use an integration platform or write code?

A platform suits simple flows between common tools. Custom code suits complex logic, heavy volume or strict control. Many products use both.

The complete guide

API Integration Checklist: the complete guide

Updated November 18, 2026 ยท Published by , Founder, StackLift AI. Written with AI assistance; how we make content.

Short answer

An API integration checklist lists what to confirm before you connect your product to another service: authentication, rate limits, timeouts, retries with backoff, idempotent writes, webhook verification, error handling, testing of failure modes, and monitoring. The aim is an integration that fails safely and can be diagnosed when something goes wrong.

What makes an API integration reliable?

A reliable integration behaves well when the other side does not. Calls time out, providers return errors, webhooks arrive twice, and limits get hit on the busiest day. Reliability comes from planning for those cases before the first line of code.

This checklist is for engineers and product owners connecting payment, CRM, ERP, messaging, analytics or AI providers. It assumes you have chosen the provider. For help deciding what to connect and how, the system integration glossary entry and the API integration cost range are good starting points.

What are the steps to build an API integration?

  1. Read the provider documentation. Output: a one-page summary of auth, limits, versioning, error formats and webhook behavior. Involve the lead engineer.
  2. Define the data contract. Output: the fields you read and write, with owners on both sides. Involve the product owner.
  3. Design authentication and secrets. Output: one credential per integration, stored in managed configuration. Involve engineering and security.
  4. Build with failure in mind. Output: timeouts, bounded retries, idempotency and a dead-letter path. Involve engineering.
  5. Handle webhooks and rate limits. Output: verified, deduplicated event handling and request queuing. Involve engineering.
  6. Test failures, then monitor. Output: a test report and dashboards with alerts. Involve QA and operations.

The rest of the guide turns these steps into checks. Many of them also appear in the production readiness checklist.

What should you confirm in the provider documentation?

Do not rely on memory or a blog post. Read the official documentation and write down answers to a fixed set of questions. Re-read them before launch because limits and behavior change.

Questions to answer from the docs
TopicQuestionWhy it matters
AuthenticationAPI key, OAuth or signed requests? How do tokens expire and refresh?Expired tokens are a common outage
Rate limitsPer second, per day, per endpoint? Are limit headers returned?Drives queuing design
VersioningHow are versions named and retired? How is notice given?Avoids surprise breaks
ErrorsWhich codes are temporary and which are permanent?Decides what to retry
IdempotencyDo write endpoints accept an idempotency key?Makes retries safe
WebhooksSigned? Retried? Ordered?Decides how to process events
SandboxIs there a test environment and how close is it to production?Shapes your testing

Pin the API version where the provider allows it, list the fields you depend on, and route change notices to a named person. A shared inbox nobody reads does not count.

How should you handle authentication and secrets?

Treat credentials as production secrets from day one. Keep them out of the repository, logs and client-side code, and give each integration its own credential so you can rotate or revoke one without touching the others. Separate keys for development, staging and production prevent a test from touching live data.

  • Request the narrowest permissions or scopes that do the job.
  • Store keys and tokens in managed configuration and rotate them on a schedule and after any exposure.
  • Handle OAuth refresh and revoked access gracefully, with a clear message and a way to reconnect.
  • Never log full request bodies that contain tokens or personal data.
  • Record who owns each credential and where it is used.

If the integration signs users in, see the Auth0 and Clerk guide and the SSO guide.

How do you handle retries, idempotency and rate limits?

When a call times out you do not know whether the other side did the work. Retrying a payment or an order without protection can do it twice. An idempotency key, a unique value sent with the request, lets the provider recognize a repeat and return the original result.

Failure handling rules
SituationWhat to doAvoid
TimeoutSet a timeout on every call; retry with the same idempotency keyWaiting forever, or retrying a write without a key
Rate limitedBack off, respect any retry hint, queue requestsHammering the endpoint in a loop
Temporary server errorRetry a bounded number of times with growing delaysUnlimited retries that pile up
Permanent client errorDo not retry; log and surface for a fixRetrying a request that can never succeed
Repeated failuresOpen a circuit breaker and alertLetting one provider outage take down your app
Unprocessable itemMove to a dead-letter queue for reviewDropping it silently

Track your own usage against the provider's limits and alert before you reach them. Queue work that does not need to be instant. Give each integration its own key so one noisy job cannot starve another.

How do you handle webhooks safely?

A webhook is a request from the provider to your server. Treat it as untrusted input that can arrive twice, late or out of order. Verify it, acknowledge it quickly and do the real work in the background.

  • Verify the signature or shared secret on every request and reject anything that fails.
  • Reply with a success code quickly, then process asynchronously so the provider does not retry unnecessarily.
  • Deduplicate by event ID so a repeated event does nothing the second time.
  • Do not assume order. Fetch current state from the API when order matters.
  • Store the raw payload for a period so you can replay after a bug fix.
  • Provide an endpoint health check and alert when events stop arriving.

Payments are the classic case. See the Stripe integration guide for the kind of events a payment provider sends and how teams usually model them.

How do you test and monitor an integration?

Test the unhappy paths on purpose. Use the provider's sandbox for normal flows and a stub or fault injection for failures the sandbox cannot produce. Then watch the integration in production, because the provider's behavior will change over time.

Test and monitor
CheckHowAlert when
Happy pathEnd-to-end test in the sandboxTest fails in the pipeline
Timeouts and errorsStub slow and failing responsesError rate rises
DuplicatesSend the same request and event twiceDuplicate records appear
LimitsSimulate throttlingUsage nears the limit
Token expiryExpire a token on purposeAuthentication errors repeat
Data accuracyReconcile counts and totals between systemsTotals drift apart

A regular reconciliation job that compares your records with the provider's catches silent problems that logs miss. See the observability glossary entry for background on logs, metrics and traces.

Should you write code or use an integration platform?

Integration platforms such as Zapier, Make, n8n and Power Automate connect common tools with little code. Custom code gives you control over logic, volume, security and testing. The right answer is often both: a platform for simple flows and code for the core of the product.

Code or platform
ChooseWhenTrade-off
PlatformSimple trigger and action between popular tools, low volume, owned by operationsLess control over retries, testing and versioning
Custom codeComplex rules, high volume, regulated data, part of your productMore to build and maintain
HybridPlatform for edges, code for the coreTwo places to monitor

See the guides for Zapier, Make and n8n, and the workflow automation discovery playbook for choosing what to automate. To scope an integration, use the free estimate or contact us.

Questions people ask

What is an idempotency key?

A unique value you send with a write request. If the same key arrives again, the provider returns the original result instead of repeating the action. It makes retries after a timeout safe.

Which errors should I retry?

Retry rate-limit responses and temporary server errors, with growing delays and a cap. Do not retry permanent client errors such as invalid input, because the result will not change.

How do I know a webhook is genuine?

Verify the signature or shared secret that the provider includes, using its documented method. Reject requests that fail the check, and never trust data in the payload without verification.

Why do webhooks arrive more than once?

Providers retry when they do not get a quick success reply, and networks can duplicate messages. Deduplicate by event ID and make your handler safe to run twice.

Do I need a staging environment for integrations?

Yes. Use the provider's sandbox and separate credentials so tests never touch live data. Not every sandbox matches production, so keep a short list of differences.

How do I plan for a provider changing its API?

Pin the version, list the fields you rely on, route change notices to a named owner and keep contract tests that fail when the response shape changes.

Sources

Sources and further reading

The standards, rules, research and official documentation this page draws on.